Spindles, linear motion systems, bearings, of the machine are imported from overseas.

Width of cut:400mm, height of cut: 80mm

Using both Panel and Scoring Saw Blades reduce chips of the cutting surfaces.

One cutter tenons two side to guarantee high joint precision.

Motions from tenoning, trimming and sizing are accomplished in one procedure.

Saw spindle and sawblade controls size and trim properly.

Parameters

SPECIFICATIONS
MODEL HFJ-500
Max. Width of Cut 500mm
Max. Height of Cut 80mm
Max. Working Size 510 x 860mm
Diameter of Spindle Ø 40mm
Speed of Spindle 6141RPM
Max. Dia. of Finger Cutter Ø 16mm
Speed of Saw 2980RPM
Diameter of Saw Ø 300MM
Motor Capacity of Main Saw Blade 2.2kw (3HP)
Rotating Speed of Main Saw Blade 2840RPM
Motor Capacity of Scoring Saw Blade 1.1kw (1.5HP)
Rotating Speed of Scoring Saw Blade 2830RPM
Max. Height between scoring saw blade’s bottom and the worktable 24mm
Max. Height between scoring saw blade’s top and the worktable 40mm
Max. Moving Speed of worktable 0.2 m/s
Time of Working Cycle 15~23sec.
Pneumatic Pressure 5.3~5.5kg/cm2
Hydraulic Pressure 25~40kg/cm2
Motor Capacity of Finger Joint Cutter 7.5kw (10HP)
Feed Motor Capacity 2.2kw (3HP)
Total Motors Capacity 13kw (16HP)
Net Weight 1850kg
Machine Size 2545x1545x1310mm
Packing Size 2750x1300x1670mm

All specification, dimensions and design characteristics shown in this catalogue are subjected to change without notice.



Machine Working Procedure

Manual Infeed Auto Pressing Auto Pressing Confirmation
Auto feeding and side cutting and machining Auto Out feed
Working Reset